Special Shaped Conveyor Belt factory In order to prevent the scattering of conveying materials when the ground is limited or with large inclination Angle is needed to lift materials, the conveyor belt with large inclination wave guard is generally selected. This conveyor belt can run in a vertical state, or at any Angle from 0 to 90 degrees, allowing large amounts of transport and heavy load transportation. Application of belt: widely used in port, metallurgy, mining, electric power. Coal industry, casting industry, construction industry, food industry, cement, fertilizer and so on. Conveyor belt skeleton material The skeleton material of conveyor belt is polyester (EP), nylon (NN), cotton (CC), customers can choose flexibly according to their own requirements. Product features Of Sidewall conveyor belt with large dip angle 1, Low maintenance cost 2, This kind of conveyor belt is composed of three parts: base belt, wavy guard edge and diaphragm plate. It combines the advantages of sidewall conveyor belt and diaphragm conveyor belt. The base belt bears the tension, the guard is used to increase the bearing material area to prevent material overflow, and the diaphragm is used to support and maintain the stable formation of material silo. 3, Conveyor belt can be along the horizontal to tilt, and from tilt to the horizontal direction of flexible delivery 4, The height of the diaphragm is generally lower than the wavy guard 5mm - 20mm. The belt has a maximum conveying Angle of 90掳. Product advantage: low maintenance cost, large throughput, and effectively prevent material scattering.Special Shaped Conveyor Belt factory website:http://www.sdlandbridges.com/rubber-conveyor-belt/special-shaped-conveyor-belt/